Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterSpring Repair in Olympia, WA
Garage door spring repair in Olympia typically costs between $220 and $450, depending on the specific spring specifications required for your door weight and cycle life, and we generally perform these repairs on the same day you call. At Servo Garage Doors Olympia, we operate under The Haven Standard, which means we do not guess at the problem or provide vague estimates over the phone. We arrive, inspect the hardware, photograph the failed component to show you exactly why it failed, and provide a flat, written price before any tools leave our truck. If we spot frayed or worn lifting lines during that inspection, we can also address Cable Repair needs on the same visit.
A broken spring is the most common reason a garage door stops working, but it is also the most dangerous component to handle. Whether you are dealing with a standard torsion system or an extension spring setup, we provide the expertise needed to restore balance and safety to your system. If you are experiencing issues with your door, please Garage Door Repair in Olympia to see how we handle broader system failures, or call us at (360) 995-1547 to schedule a technician.
When You Need Spring Repair
Recognizing the symptoms of a failed spring early can prevent damage to your opener or, more importantly, a dangerous door collapse. In Olympia, where our damp, fluctuating climate can accelerate rust and metal fatigue, we often see springs fail earlier than their rated lifespan. Here are the signs that your springs need professional attention:
- The “Loud Bang”: If you heard a sharp, gunshot-like noise coming from the garage, a spring likely snapped. This is the sound of the metal reaching its failure point under high tension.
- Door Won’t Lift: If your opener motor runs but the door refuses to budge, or it only lifts a few inches before stopping, the spring is no longer counterbalancing the weight of the door.
- Visible Gap in the Coil: If you look at the shaft above your garage door, you may see a distinct gap or separation in the metal coils of the torsion spring.
- Uneven Movement: If the door looks crooked as it moves or feels heavy when you try to lift it manually, one of the springs has likely lost its tension or broken entirely.
- Cable Slippage: When a spring breaks, the cables often lose tension and may jump off the drums. If your cables are dangling or frayed, do not attempt to operate the door.
If you notice any of these signs, please stop using the door immediately. Operating a door with a broken spring places immense strain on your opener’s logic board and gears, which can turn a simple spring repair into a much more expensive Garage Door Repair service like motor replacement.
Safety Warning: The Danger of High-Tension Springs
Garage door springs are under extreme tension. They are designed to lift the weight of a door that can exceed 300 pounds. When a spring breaks, or when it is mishandled during a repair attempt, that stored energy is released instantly and violently. We strongly advise against attempting to adjust, lubricate, or replace these springs yourself. Serious injury is a very real possibility if the spring releases unexpectedly. Our technicians are trained to manage this tension safely, utilizing proper winding bars and containment systems to ensure the work is done without risk to you or your home. If you suspect your springs are failing, call (360) 995-1547 and let a professional handle the heavy lifting.
Before
AfterOur Spring Repair Process
We do not operate on guesswork. Every visit follows the documentation protocols established by The Haven Standard to ensure you know exactly what you are paying for before we begin. Here is how we handle spring repair:
- Visual Inspection and Documentation: Per Clause 4 of The Haven Standard, our technician starts by inspecting the door and photographing the failed component. You will see exactly what we found-whether it is a clean break or significant rust-induced fatigue-before we discuss a solution.
- Written Scope and Price: We provide a flat, written price and a clear scope of work before any repairs begin. This is Clause 1 of The Haven Standard. You will know the exact cost for the parts and labor required to get your door moving again.
- Precision Matching: We do not use “one-size-fits-all” springs. We measure the wire diameter, the internal diameter of the spring, and the length to ensure the new spring matches the specific weight of your door. We service all major brands, including LiftMaster, Wayne Dalton, and Craftsman, ensuring the replacement meets or exceeds the original manufacturer specifications.
- Installation and Balancing: Once the new springs are installed, we perform a balance test. A properly balanced door should stay in place when lifted halfway by hand. If it slams down or flies up, the spring tension is incorrect. We adjust until it is perfect.
- Photo Record of Completion: After the job is finished, we provide a documented photo record of the new springs installed and the completed work. This serves as your paper trail, ensuring you have proof of the repair for your home records.
Spring Repair Pricing in Olympia
We believe in upfront, transparent pricing. We do not use “call for a quote” to hide our numbers. While the exact price depends on the specific wire gauge and cycle rating required for your door, the following table provides the typical range for spring repair services in the Olympia market. See our full guide on How Much Does Garage Door Repair Cost? (2026 Price Guide) - Olympia, WA for more details.
| Service Type | Typical Price Range |
|---|---|
| Single Torsion Spring Replacement | $220 - $320 |
| Double Torsion Spring Replacement | $350 - $450 |
| Extension Spring System Repair | $230 - $340 |
These prices include the cost of high-cycle springs, which last longer than standard builder-grade hardware. We also provide a Free Second Opinion if you have already received a written estimate from another company. If you have paperwork from a competitor, bring it to us; we are happy to review it against our standard to ensure you are getting a fair deal. Call (360) 995-1547 to get your exact quote for your specific door setup.
FAQs - Spring Repair
Can I just replace one spring if I have a two-spring system?
We strongly recommend replacing both springs if you have a double-spring system. Springs are typically installed at the same time and undergo the same amount of usage; if one has snapped, the other is likely near the end of its cycle life as well. Replacing both ensures the door remains balanced and prevents the need for a second service call in the near future.
How long do garage door springs usually last?
Most standard springs are rated for 10,000 cycles, which usually translates to 5 to 7 years of daily use in a typical Olympia household. However, factors like local humidity, which can lead to rust and corrosion, and the weight of your door can impact this. We offer high-cycle spring options that can extend this life significantly, providing better value over the long term.
Do you carry springs for all garage door brands?
Yes, we maintain an inventory that supports all major brands, including Raynor, LiftMaster, and Wayne Dalton. Because we focus on the specifications of the spring itself-the wire gauge and the length-rather than just the brand name on the door, we can find the correct match for almost any residential system in Olympia.
Is it cheaper to repair the spring or replace the whole door?
In the vast majority of cases, replacing the springs is significantly more cost-effective than replacing the entire door. Unless your door has sustained structural damage, such as a dented panel, a warped frame, or a Track Realignment issue that compromises the integrity of the system, a spring replacement is a standard maintenance task that restores full functionality.
If you have questions about your specific garage door system or need an expert to evaluate your springs, our team is ready to help. We provide honest, evidence-based service to homeowners across Olympia. Call (360) 995-1547 today for a free estimate or to schedule your service. Every job is backed by our 365-Day Done Right Promise, ensuring your peace of mind.
Written by Marcus Deller, Owner at Servo Garage Doors Olympia, serving Olympia.